Operating instructions

International English 5. SYSTEM PARAMETERS
62 MICROMASTER 420 Operating Instructions
6SE6400-5AA00-0BP0
Parameter
Number
Parameter Name
Min
Max
[Default]
Units
♦
♦♦
♦P0003 User
Access Level
♦
♦♦
♦P0004 Setting
♦
♦♦
♦Changeable
♦
♦♦
♦Status
P0757 Value X1 of analog input scaling
Parameters P0757 – P0760 are used to configure the analog input scaling as shown:
(%) P0760 Y2
(%) P0758 Y1
(V) P0757 X1
Setpoint (%)
P0759 X2
Analogue
input (V)
P1
P2
0V
10V
ASPmax
ASPmin
Alternative possibilities are given by the diagrams below.
0V
10V
ASPmax
ASPmin
P1
P2
0V
10V
ASPmax
ASPmin
P1
P2
Notes:
Analog Setpoints represent a % of the normalized frequency in P2000.
Analogue Setpoints may be larger than 100%.
ASPmax represents the highest analog setpoint (This may be at 0V).
ASPmin represents the lowest analog setpoint (This may be at 10V).
Default values provide a scaling of 0V=0%, and 10V=100%.
0
10
[0]
-
2
8
‘•’
Value Y1 of analog input scalingP0758
Sets value of Y1 as described in P0757
-99999
99999
[0]
%
2
8
‘•’
P0759 Value X2 of analog input scaling
Sets value of X2 as described in P0757
0
10
[10]
V
2
8
‘•’
P0760 Value Y2 of analog input scaling
Sets value of Y2 as described in P0757
-99999
99999
[100]
%
2
8
‘•’