Operating instructions

5. SYSTEM PARAMETERS International English
MICROMASTER 420 Operating Instructions 47
6SE6400-5AA00-0BP0
PI Controller P0004=22 Factory settings P0010=30
P 0003 BOP/AOP read access level P 0003 BOP/AOP read access level
P 0010 Drive commissioning P 0010 Drive commissioning
P 2200 Enable PI controller P 0970 Factory settings
P 2201 Fixed setpoint 1
P 2202 Fixed setpoint 2
P 2203 Fixed setpoint 3
P 2204 Fixed setpoint 4
P 2205 Fixed setpoint 5
P 2206 Fixed setpoint 6
P 2207 Fixed setpoint 7
r 2224 Connector: fixed PI setpoint
P 2231 Setpoint memory of the MOP
P 2232
Inhibit keypad setpoint reverse
direction
P 2240 Setpoint of the MOP
r 2250 Active digital PI output setpoint
P 2253 Source: PI setpoint
P 2257 Acceleration time for PI setpoint
P 2258 Deceleration time for PI setpoint
r 2260 PI setpoint
P 2264 PI feedback
P 2265 PI feedback filter time constant
r 2266 PI feedback
P 2271 PI transducer type
P 2272
Connector: PI scaled feedback
signal
r 2273 PI error
P 2280 PI proportional gain
P 2285 PI integral time
P 2291 PI upper limit
P 2292 PI output lower limit
r 2294 PI output