Operating instructions

5 System parameters Issue B1
MICROMASTER 420 Operating Instructions
56 6SE6400-5AA00-0BP0
5.3 Parameter list (short form)
Explanatory information on following table:
Ø Default: Factory setting
Ø Level: Access level
Ø DS Inverter status (Drive State), indicates the inverter state in which a
parameter can be modified (see P0010).
♦ C Commissioning
♦ URun
♦ T Ready to run
Ø QC Quick Commissioning
♦ Q Parameter can be modified in the Quick Commissioning state.
♦ N Parameter cannot be modified in the Quick Commissioning state.
Always
Par. No. Parametername Default Acc WS QC
r0002 Drive state - 2 - -
P0003 User access level 1 1 CUT -
P0004 Parameter filter 0 1 CUT -
P0010 Commissioning parameter filter 0 1 CT N
P3950 Access of hidden parameter 0 4 CUT -
Quick Commissioning
Par.-No. Parametername Default Level WS QC
P0100 Europe / North America 0 1 C Q
P3900 End of quick commissioning 0 1 C Q
Parameter Reset
Par.-No. Parametername Default Level WS QC
P0970 Factory reset 0 1 C -