Operating instructions

2 Installation Issue B1
MICROMASTER 420 Operating Instructions
24 6SE6400-5AA00-0BP0
Upper
rail latch
Lower
rail latch
Release Mechanism
2.3.1 Mounting on standard rail, Frame Size A
Fitting the Inverter to a 35 mm standard rail (EN 50022)
1. Fit the inverter to the rail using the upper rail
latch.
2. Push the
inverter
against the
rail and the
lower rail
latch should
click into
place.
Removing the Inverter from the rail
1. To disengaged the release mechanism of the
inverter, insert a screwdriver into the release
mechanism.
2. Apply a downward pressure and the lower rail latch
will disengage.
3. Pull the inverter from the rail.