Operating Instructions

Siemens Industry, inc. 34
8. Acknowledge the upgrade by clicking OK.
MD-xxHD Web App Overview
The MD-xxHD power meter hosts a Web Application that can be accessed by any smart device running a
web browser. The MD-xxHD Web App can be accessed by using the USB or Ethernet port.
Macintosh users can configure the meter using the MD-xxHD Web App Interface by installing a
driver which is available from the Siemens web site at www.dentinstruments.com/siemens
Connect to Web App using USB
1. Connect your smart device to the meter
2. Open a Web Browser
3. Enter http://169.254.1.5 (this is the static address of the USB port)
Connect to Web App using Ethernet
1. Discover the IP address of the meter by one of the following methods (a-c):
a. Navigate to About Meter on the LCD menu.
b. Use a network discovery tool to find the address by connecting and disconnecting the
Ethernet cable.
c. Set the meter to a static address using the serial interface.
2. Connect your smart device to the same subnet as the MD-xxHD meter.
3. Open a Web Browser.
4. Enter the MD-xxHD’s Ethernet address into the web browser.
Authentication
Because the MD-xxHD Web App can be viewed and controlled by any smart device, and communicates
in parallel to the host system, the MD-xxHD can be configured to require a PIN Number to restrict access
the meter.
Enter the PIN Number if assigned, or leave blank if unassigned, and press the LOGIN button.
Organizationally, the MD-xxHD Web App works much the same as ViewPoint HD, although it has no
analytics and operates on a single element at a time.