Operating Instructions

Siemens Industry, inc. 16
Meter Configuration Overview
▪ Work performed ahead of the installation saves time in the field and results in fewer
mistakes!
Tools
Typical Work
• Desktop or Laptop PC
• USB Type AB Cable (preferred) or
Ethernet and USB wall charger
(> 500 mA)
• Thumb Drive included with order
(ViewPoint HD Installer) or access to
https://www.dentinstruments.com/siemens
• Electrical Schematics of project
• Installation of ViewPoint HD Software
• Connect USB/Ethernet cable from PC
to meter
• Establish communication with meter
• Firmware update (if desired)
• Configure software for anticipated
meter setup
• Field wiring documentation
• Set alarms
• Set security PINs
Meter Installation Overview
▪ Performed by licensed electrician.
Tools
Typical Work
• Mounting hardware (customer
supplied)
• Wiring and supplies, labels, wire ties
• Tablet, Smart Device, or
Laptop PC
• Multi Meter, Current Clamp
• Camera
• Mechanical mounting
• Electrical installation
• Install voltage cover
• Apply power to meter
• Confirm basic operation of meter