answers 2 Betriebsanleitung / Operating manual SCENICVIEW P996-1 Deutsch - English Downloaded from ManualMonitor.
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an: ● unsere Hotline: Mo-Fr: 8 - 18 Uhr Sa: 9 - 14 Uhr Tel.: ++ 49 (0) 180 3777 000 ● Ihren zuständigen Vertriebspartner ● Ihre Verkaufsstelle Weitere Informationen finden Sie in den Handbüchern "Sicherheit und Ergonomie" und "Garantie". Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: http://www.fujitsu-siemens.com Are there ... ...
Downloaded from ManualMonitor.
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.
Deutsch English SCENICVIEW P996-1 Farbbildschirm Colour monitor Betriebsanleitung Operating Manual TCO'99 Ausgabe Juni 2004 June 2004 edition Downloaded from ManualMonitor.
VESA, DDC und DPMS sind eingetragene Warenzeichen der Video Electronics Standards Association. Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung. Liefermöglichkeiten und technische Änderungen vorbehalten. Dieses Handbuch wurde erstellt von cognitas.
Contents Introduction........................................................................................................................................1 Notational conventions...............................................................................................................1 Important notes .................................................................................................................................2 Safety notes...........................................................
Downloaded from ManualMonitor.
Introduction Your new SCENICVIEW P996-1 monitor supplies you with a high-quality colour image with high resolution and ergonomic refresh rates. It possesses a whole range of useful features and functions, e.g.: ● ● 19" (46 cm) high-resolution CRT (0.
Colour Monitor SCENICVIEW P996-1 Important notes ! In this chapter you will find information regarding safety which is essential to take note of with your monitor. Safety notes This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. If you have any questions, contact your sales outlet or our help desk.
Colour Monitor SCENICVIEW P996-1 ● Tampering with the device, in particular adjusting the high voltage or installing a different type of CRT tube, may result in a large amount of X-ray radiation being emitted. Devices modified in this way no longer comply with their licence and may not be used. ● You may set only those resolutions and refresh rates specified in the "Technical data" chapter. Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or our help desk.
Colour Monitor SCENICVIEW P996-1 Power cable To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set. ● The female/male receptacles of the cord set must meet CEE-22 requirements. ● The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath or on the insulation of one of the inner conductors. ● For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used.
Colour Monitor SCENICVIEW P996-1 FCC Class B Compliance Statement The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products will appear in the accompanying documentation. NOTE: This equipment has been tested and found to comply with the limits for a "Class B" digital device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
Colour Monitor SCENICVIEW P996-1 Disposal and recycling This device has been manufactured to the highest possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The CRT contains no cadmium The device may be taken back after use to be recycled, provided that it is returned in a condition that is the result of normal use. Any components not reclaimed will be disposed of in an environmentally acceptable manner.
Colour Monitor SCENICVIEW P996-1 Installing an ergonomic video workstation Before you set up your equipment, you should select a suitable position for working at the monitor. Please observe the following advice when installing a video workstation. 1 1 1 = Windows Avoid direct and reflected glare. Avoid glare from electric lighting. 600 mm 600 mm 2 2 1 = Edge of desk 2 = Permissible reaching sector Position the keyboard where it is easiest to reach.
Colour Monitor SCENICVIEW P996-1 Assembling the monitor base Your monitor is shipped with a base which allows you to rotate and tilt the monitor to the best position. Attach the base as follows: ! ► Lay the monitor with the display downwards on a soft surface. ► Fit the base so that its hooks slot into the recesses on the monitor. ► Slide the base forward in the direction of the arrow until it clicks into position. ► Place the monitor in an upright position.
Colour Monitor SCENICVIEW P996-1 ► Be sure that the monitor and the computer are switched off. 1 = Power connector 2 = Data cable ! The computer power plug must be pulled out! The data cable is permanently attached to the monitor. It has a 15-pin D-SUB connector for the monitor port of the computer. ► Connect the 15-pin connector of the data cable to the (active) monitor port on the computer and secure the plug-in connection by tightening the safety screws.
Colour Monitor SCENICVIEW P996-1 Operation of the monitor 1 = Buttons for the OSD menu (On-Screen-display) 2 = Power indicator 3 = ON/OFF switch Switching the monitor on ► Drücken Sie den Ein-/Ausschalter (3). The power indicator (2) lights up green when the computer is switched on. i If your computer has a power management function (energy-saving mode), you should read the "Notes on power management" of the monitor in this chapter.
Colour Monitor SCENICVIEW P996-1 Notes on power management If your computer is equipped with power management, the monitor can support this function fully. Here the monitor does not distinguish between the individual energy-saving modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect.
Colour Monitor SCENICVIEW P996-1 Changing the monitor settings The monitor display is adjusted with the buttons of the control panel. Menu Exit 1 1 = Exit button 3 2 2 = Arrow buttons 4 3 = Menu button 4 = ON/OFF switch Menu button The menu button switches on the OSD menu and activates the selected function. 65 When the menu is activated, mark the symbol for the topic or function you want to set with the buttons 6 and 5. When the menu is not activated, these buttons have not function.
Colour Monitor SCENICVIEW P996-1 The functions of the selected topic are shown on the right in the OSD menu. ► ► Mark the function for which you want to change the settings with the buttons 6 or 5. Press the Menu button to select the highlighted function. You can now change the value of the selected function. ► ► Set the value of the selected function with the buttons 3 and 4. Press the Exit button to exit the function again. The set value is applied.
Colour Monitor SCENICVIEW P996-1 Set or deactivate moiré reduction With this function you set the effectiveness of the horizontal and vertical Moiré reduction. To deactivate the moiré reduction, set the value to 0. If the picture you see on screen has light and dark stripes or appears dull and blurred, this may be due to what is known as the moiré effect. This effect usually has physical causes, being triggered by interference between the pixels in the matrix and the video signal.
Colour Monitor SCENICVIEW P996-1 This menu contains the following functions: ● Setting the colour temperature ● Setting colour ratios ● Setting the sRGB colour mode Setting the colour temperature The "warmth" of the screen colours is set using the colour temperature. You can set the colour temperature in the range from 6500 K to 9300 K in 100 K steps. The current colour temperature is shown in the menu.
Colour Monitor SCENICVIEW P996-1 Adjusting the horizontal position With this function you move the picture to the left or to the right. Adjusting the vertical position With this function you move the picture up or down. Adjusting the horizontal size With this function you narrow or widen the screen display. Adjusting the vertical size With this function you compress or stretch the screen display.
Colour Monitor SCENICVIEW P996-1 In the first line of this view you see the set horizontal frequency and the refresh rate of the monitor. In the second line you see the set screen resolution. If none of the default operating modes is set, for example "PP" is shown instead of the screen resolution. An overview of the default operating modes is provided in the section "Preset operating modes".
Colour Monitor SCENICVIEW P996-1 Technical data Dimensions and weight CRT: 48 cm (19”) Visible diagonals: 46 cm Dot pitch: 0.25 mm Maximal resolution: 1600 x 1200 pixels Dimensions (W x H x D): 440 mm x 455 mm x 459 mm Weight: 21.6 kg Accessories: Power cable (1.8 m) Storable display modes: 16 (8 of which are preset) Electrical data Video: analogue, positive, 0.7 Vpp, 75 Ω Synchronisation: TTL Horizontal frequency: 30 kHz .... 96 kHz (multi-scanning) Refresh rate: 50 Hz ....
Colour Monitor SCENICVIEW P996-1 Preset operating modes The picture position and size have been set to optimum values at the factory for the operating modes listed above. Depending on the screen controller used, it may be necessary to adjust the display position and size. In this case, you can change and save the settings (see "Changing the monitor settings").
Colour Monitor SCENICVIEW P996-1 Tilting and turning area 13° 45° 45° 5° The specified tilting area refers to the zero position of the monitor foot marked with an arrow. Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. The display is too small or not centred The monitor recognises an undefined mode.
Colour Monitor SCENICVIEW P996-1 No display (power indicator does not light) ► Check whether the monitor is switched on. ► Check whether the power cable on the monitor is connected correctly. ► Check whether the computer is switched on. No display (power indicator lights) ► Check whether the computer is switched on. ► Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. ► Check whether the monitor connection of the computer used is active.
TCO'99 Congratulations You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
TCO'99 Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.
