Specifications

MC35i AT Command Set
2.11 AT+CMEE
s
m obil e
MC35i_ATC_V01.03 Page 45 of 444 5/7/04
Confidential / Released
2.11 AT+CMEE Mobile Equipment Error Message Format
AT+CMEE controls the format of the error result code +CME ERROR: <err> that indicates errors relating to ME
functionality.
Possible error result codes are listed in Section 2.11.1, CME ERRORS related to GSM 07.07, Section 2.11.2,
GPRS-related CME ERRORS and Section 2.11.3, CMS ERRORS related to GSM 07.05.
In multiplex mode (refer
AT+CMUX) the setting applies only to the logical channel where selected. The setting on
the other channels may differ.
Syntax
Parameter Description
0
(&F)
Disable result code (only 'ERROR' will be displayed).
1 Enable error result code with numeric values.
2 Enable error result code with verbose (string) values.
Test Command
AT+CMEE=?
Response(s)
+CMEE: (list of supported<errMode>s)
OK
Read Command
AT+CMEE?
Response(s)
+CMEE: <errMode>
OK
Write Command
AT+CMEE=<errMode>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
GSM 07.07
<errMode>
(num)(&W)(&V)