Specifications

MC35i AT Command Set
19.7 Alphabetical List of AT Commands
s
m obil e
MC35i_ATC_V01.03 Page 444 of 444 5/7/04
Confidential / Released
ATD Mobile originated call to dial a number Section 7.2, page 131
ATD*98# Request GPRS IP service Section 10.14, page 254
ATD*99# Request GPRS service Section 10.13, page 252
ATD><mem><n> Originate call to phone number in memory Section 7.3, page 134
ATD><n> Originate call to phone number selected from active mem-
ory
Section 7.4, page 136
ATD><str> Originate call to phone number in memory with corre-
sponding field
Section 7.5, page 138
ATDI Mobile originated call to dialable ISDN number <n> Section 7.6, page 140
ATDL Redial last telephone number used Section 7.7, page 141
ATE Enable command echo Section 4.5, page 85
ATH Disconnect existing connection Section 7.8, page 142
ATH Manual rejection of a network request for PDP context
activation
Section 10.15, page 255
ATI Display product identification information Section 6.1, page 119
ATL Set monitor speaker loudness Section 16.2, page 373
ATM Set monitor speaker mode Section 16.3, page 374
ATO Switch from command mode to data mode / PPP online
mode
Section 7.16, page 150
ATP Select pulse dialing Section 7.15, page 149
ATQ Set result code presentation mode Section 2.4, page 33
ATS0 Set number of rings before automatically answering a call Section 7.10, page 144
ATS10 Set disconnect delay after indicating the absence of data
carrier
Section 7.14, page 148
ATS18 Extended call release report Section 3.5, page 77
ATS3 Write command line termination character Section 18.2, page 417
ATS4 Set response formatting character Section 18.3, page 418
ATS5 Write command line editing character Section 18.4, page 419
ATS6 Set pause before blind dialing Section 7.11, page 145
ATS7 Set number of seconds to wait for connection completion Section 7.12, page 146
ATS8 Set number of seconds to wait for comma dialing modifier Section 7.13, page 147
ATT Select tone dialing Section 7.18, page 152
ATV Set result code format mode Section 2.5, page 34
ATX Set CONNECT result code format and call monitoring Section 2.6, page 36
ATZ Set all current parameters to user defined profile Section 2.7, page 37
AT Command Description Section and Page