Specifications

MC35i AT Command Set
17.1 AT+CALA
s
m obil e
MC35i_ATC_V01.03 Page 406 of 444 5/7/04
Confidential / Released
EXAMPLE 2
To set a fresh alarm using the same message as in Example 1, simply enter date and time. <n>, <type>,
<text>, <tlength> can be omitted:
When the alarm is executed the URC comes with the same message:
EXAMPLE 3
To configure the Alarm mode, e.g. for May 20, 2004, at 8.30h, enter
Next, power down the ME:
When the alarm is executed the ME wakes up to Alarm mode and displays a URC. If available, this line is
followed by the individual
<text> most recently saved. If no individual message was saved only the first line
appears.
17.1.1 Summary of AT commands available in Alarm mode
Table 17.1: List of AT commands available in Alarm mode
AT+CALA="04/05/31,08:50:00"
OK
+CALA: Good Morning
AT+CALA="04/05/20,08:30:00"
OK
AT^SMSO
^SMSO: MS OFF
^SYSSTART ALARM MODE
+CALA: Good Morning
AT command Function
AT+CALA Set alarm time.
AT+CCLK Set date and time of RTC.
AT^SBC Query average current consumption, enable / disable the undervoltage URC
"
^SBC".
If product is MC35i Terminal: AT command not relevant.
AT^SCTM Query temperature of GSM engine.
AT^SMSO Power down GSM engine.