Specifications

MC35i AT Command Set

2. Configuration Commands

obil

MC35i_ATC_V01.03 Page 29 of 444 5/7/04

Confidential / Released

2. Configuration Commands

The AT Commands described in this chapter allow the external application to determine the MC35i's behaviour

under various conditions.

2.1 AT&F Set all current parameters to manufacturer defaults

AT&F sets all current parameters to the manufacturer defined profile.

Syntax

Parameter Description

[0] Set all TA parameters to manufacturer defaults

Notes

• List of parameters reset to manufacturer default can be found in Section 19.5, Factory Default Set-

tings Restorable with AT&F

• In addition to the default profile, you can store an individual one with

AT&W. To alternate between the two pro-

files enter either

ATZ (loads user profile) or AT&F (restores factory profile).

• Every ongoing or incoming call will be terminated.

Exec Command

AT&F[<value>]

Response(s)

PIN ASC0 MUX1 MUX2 MUX3

! % % % %

Reference(s)

V.25ter

<value>

(num)