Specifications

MC35i AT Command Set

1.8 Errors and Messages

obil

MC35i_ATC_V01.03 Page 28 of 444 5/7/04

Confidential / Released

1.8 Errors and Messages

The final result codes "+CME ERROR: <err>" and "+CMS ERROR: <err>" indicate errors related to mobile equip-

ment or network. The effect is similar to an ERROR result code.

A final result error code terminates the execution of the command and prevents the execution of all remaining

commands that may follow on the same command line. If so, neither ERROR nor OK result code are returned

for these commands. A 30 seconds timeout causes ERROR to be returned when the input of a command is not

complete.

The format of <err> can be either numeric or verbose. The setting is made with the command

AT+CMEE.