Specifications

MC35i AT Command Set
9.9 AT+CLIP
s
m obil e
MC35i_ATC_V01.03 Page 217 of 444 5/7/04
Confidential / Released
+CLIP: <number>, <type>
When CLIP is enabled at the TE (and is permitted by the calling subscriber), an unsolicited result code is
returned after every RING (or +CRING:
<type>) at a mobile terminating call.
Command Description
Test command returns values supported by the TA as a compound value.
Read command gives the status of <n>, and also triggers an interrogation of the provision status of the CLIP
service according GSM 02.81 (given in
<m>).
If no SIM card is available or SIM-Pin isn't entered, the command response is "ERROR".
Write command enables or disables the presentation of the CLI at the TE. It has no effect on the execution of the
supplementary service CLIP in the network.
Parameter Description
[0]
(&F)
suppress unsolicited result codes
1 display unsolicited result codes
0 CLIP not provisioned
1 CLIP provisioned
2 unknown
string type phone number of calling address in format specified by
<type>
type of address octet in integer format; 145 when dialling string includes in-ternational access code character
"+", otherwise 129.
0CLI valid
1 CLI has been withheld by the originator.
2 CLI is not available due to interworking problems or limitations of originating
network.
<number> shall be an empty string ("") and <type> value will not be
significant.
When CLI is not available (
<CLI validity>=2), <number> shall be an empty string ("") and <type> value
will not be significant. Nevertheless, TA shall return the recommended value 128 for
<type> (TON/NPI
unknown in accordance with GSM 04.08 subclause 10.5.4.7).
When CLI has been withheld by the originator, (
<CLI validity>=1) and the CLIP is provisioned with the
"override category" option (refer GSM 02.81 and GSM 03.81),
<number> and <type> is provided. Otherwise,
TA shall return the same setting for
<number> and <type> as if the CLI was not available.
<n>
(num)(&W)(&V)
<m>
(num)(&V)
<number>
(str)
<type>
(num)
<CLI validity>
(num)