Specifications

Migration from MC35 to MC35i
RELEASED
MC35_MC35i_MIG_V01.03 Page 32 of 33 23.04.03
# AT Command
192 AT^SPIC Display PIN counter
193 AT^SPLM Read the PLMN list
194 AT^SPLR Read entry from the preferred operators list
195 AT^SPLW Write an entry to the preferred operators list
Minor differences in implementation
MC35
TA writes an entry to the SIM list of preferred operators at
location number <index>. If <index> is given but <oper> is
left out, the entry is deleted. If <oper> is given but <index>
is left out, <oper> is inserted in the next free location
MC35i
TA writes an entry to the SIM list of preferred operators at
location number <index>. If <index> is given but <oper> is
left out, the entry is deleted.
196 AT^SPWD Change password for a lock
197 AT^SRTC Select, query, test ring tone parameter
Additional parameter, differences in wording of command syntax description
MC35 MC35i
Test command
AT^SRTC=?
Response
^SRTC: (list of supported <type>s), (list of supported
<vol>s), (list ofsupported <event>s) OK
Read command
AT^SRTC?
Response
^SRTC: <type> of event=0, <vol> of event=0, <type> of
event=1, <vol> of event=1,<stat>OK
Write command
AT^SRTC=[<type>][,<vol>]
[,<event>]
Response
^SRTC: <type>, <vol>,<event> OK
New parameter:
<event> Event to be indicated. All settings of <type> and
<vol> apply to the selected event only.
0 All MTCs (voice, data etc.)
1 Incoming short message.
198 AT^SSCONF SMS Configuration
199 AT^SSDA Set Display Availability
201 AT^SSYNC Configure SYNC Pin
202 AT^STCD Display Total Call Duration