Specifications

Migration from MC35 to MC35i
RELEASED
MC35_MC35i_MIG_V01.03 Page 30 of 33 23.04.03
4.2.6 AT commands for SIM Application Toolkit (GSM 11.14)
Table 15: SIM Application Toolkit AT commands
# AT Command
153 AT^SSTA Remote-SAT Interface Activation
154 AT^SSTN
MC35
Remote-SAT Notification
MC35i
Remote-SAT Notification (Support of Proactive
Command LAUNCH_BROWSER)
155 AT^SSTGI
MC35
Remote-SAT Get Information
MC35i
Remote-SAT Get Information (Support of Proactive
Command LAUNCH_BROWSER)
156 AT^SSTR
MC35
Remote-SAT Response
MC35i
Remote-SAT Response (Support of Proactive
Command LAUNCH_BROWSER)
4.2.7 Siemens defined AT commands for enhanced functions
Table 16: Siemens defined AT commands
# AT Command
157 AT+CXXCID Display card ID (identical to AT^SCID)
158 AT^MONI Monitor idle mode and dedicated mode
Differing parameters, implementation and syntax wording
MC35
PLMN only
MC35i
PLMN is divided into MCC and MNC, differing statuses
159 AT^MONP Monitor neighbour cell
Differing parameters
MC35
PLMN only
MC35i
PLMN is divided into MCC and MNC
160 AT^SACM Advice of charge and query of ACM and ACMmax
161 AT^SBC Battery charge and charger control
Differing parameters
MC35
<bcs>
0 No charging adapter is connected
1 Charging adapter is connected
2 Charging adapter is connected, charging in progress
3 Charging adapter is connected, charging has finished
4 Charging error, charging is interrupted
5 False charging temperature, charging is interrupted
while temperature is beyond allowed range
<bcl> Battery capacity
0, 20, 40, 60, 80, 100 percent of remaining capacity (6
steps)
0 indicates that either the battery is exhausted or the
capacity value is not available
<mpc> Average power consumption:
Value (0...5000) of average power consumption (mean
value over a couple of seconds) in mA. See read and write
command for details.
MC35i
Feature not supported – not relevant to MC35i
<bcs> Connection status of charging adapter. Not relevant
for MC35i.
0 No charging adapter is connected.
<bcl> Battery capacity. Not relevant for MC35i.
0 Indicates that no battery is available.
<mpc> Average power consumption.
0 - 5000 ME's power consumption in mA averaged over a
couple of seconds.