Specifications

Migration from MC35 to MC35i
RELEASED
MC35_MC35i_MIG_V01.03 Page 26 of 33 23.04.03
# AT Command
MC35
N/A
MC35i
Additional "rssi" value available for <desc> parameter:
Received signal (field) strength, scaled to value range 0…5,
or 99 if not measurable.
0: signal strength < 112 dBm
1 - 4: signal strength in 15 dBm steps
5: signal strength > -51 dBm
See also AT+CSQ in Chapter 4.46. Value range of AT+CSQ
is 0 - 31.
92 AT+CLCC List current calls of ME
Differing parameter implementation
MC35
N/A
MC35i
<alpha> - alphanumeric representation in phonebooks:
The maximum displayed length of <alpha> is 16 characters.
If <alpha> has more than 16 characters, only the first 15
characters will be displayed. To indicate an overflow, a
special character will be used for the 16th character: This
will be a space if the character set selected with +CSCS is
"GSM", or "E400" if the character set is "UCS2".
93 AT+CLCK Facility lock
Differing parameters, wording of command syntax description and notes
MC35
Additional <fac> value:
"CS" Keypad lock (not supported since keypad cannot be
directly connected to the GSM engine).
MC35i
N/A
94 AT+CLIP Calling line identification presentation
95 AT+CLIR Calling line identification restriction
96 AT+CLVL Loudspeaker volume level
97 AT+CMEE Report mobile equipment error
98 AT+CMER Mobile equipment event reporting
Differing parameter MC35i
MC35
N/A
MC35i
Additional "rssi" value available for <desc> parameter.
99 AT+CMUT Mute control
100 AT+CMUX Enter multiplex mode
101 AT+COPN Read operator names
102 AT+COPS Operator selection
103 AT+CPAS Mobile equipment activity status
104 AT+CPBR Read current phonebook entries
Differing note
MC35
N/A
MC35i
This command can be used only after the phonebook data
from the SIM have been read successfully for the first time.
Reading starts after successful SIM authentication has been
performed, and may take up to 30 seconds depending on
the SIM used. While the read process is in progress, an
attempt to use any of the phonebook commands will result
in "+CME Error: 14" (SIM busy).
105 AT+CPBS Select phonebook memory storage
106 AT+CPBW Write phonebook entry
107 AT+CPIN Enter PIN
108 AT+CPIN2 Enter PIN2