Cell Phone User Guide

93Setup
© Siemens AG 2003, E:\Auftrag\Siemens\MobilePhones\M75 Sirius\en\LA\SIR_Security.fm
Template: X75, Version 2.1; VAR Language: en; VAR issue date: 050524
right page (93) of M75 Sirius FUG en, A31008-H7430-A1-1-7619 (04.06.2005, 09:01)
Setup
Security
C ¢T¢Security
¢Select function.
Auto key lock
The keypad is locked automatically
if no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used
accidentally. However, you can still
be called and you can still make an
emergency call.
Direct call
(Phone-code protected)
Only one phone number can be
dialled (see also page 27).
Only ‚ b
(PIN2 or phone-code protected)
Dialling options are restricted to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually be-
fore dialling.
If the SIM card does not support PIN2
input, the whole Phonebook can be
protected with the phone code.
PIN codes
For description, see page 17:
PIN control, Change PIN, Change PIN2,
Chg.phonecode
This SIM only b
(Phone-code protected)
The phone can be connected to a
SIM card once the phone code is en-
tered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Additional information
The keypad can also be directly locked and
unlocked in standby mode.
In each case:
#
Press and hold.