Cell Phone User Guide

9Getting started
© Siemens AG 2003, E:\Auftrag\Siemens\MobilePhones\M75 Sirius\en\LA\SIR_Startup.fm
Template: X75, Version 2.1; VAR Language: en; VAR issue date: 050524
right page (9) of M75 Sirius FUG en, A31008-H7430-A1-1-7619 (04.06.2005, 09:01)
Getting started
The phone is packaged in dismantled
form and must be re-assembled prior
to using for the first time.
In rare cases, static discharge may
cause discolouration at the edges of
the display. However, this will disap-
pear within approx. 10 minutes.
Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Place the SIM card flat in front of
the slot with the contact surface
facing downwards. Then push
the SIM card in using gentle pres-
sure
1 (ensure that the cham-
fered corner is in the correct
position).
• To remove the SIM card push the
latch downwards
2
and pull out
the SIM card in shown direction
3
. Please do not use any tools.
• Insert the battery sideways
into the phone
4
, then press it
downwards
5
until it clicks into
position.
• To remove the battery, pull it out
with the retaining tab on the side.
Your phone's
display is sup-
plied with a
protective film.
Remove this
film slowly be-
fore assem-
bling the
phone.
3
1
2
4
5