Data Sheet for Product

ManualsBrandsSiemens ManualsBuilding automationTC Modular Series for BACnet Networks Technical Specification Sheet

Table Of Contents

Trane Driver on the TC Modular Platform

Technical Specification Sheet

Document No. 127-0172T

November 23, 2009

Siemens Industry, Inc.

Page 1 of 2

Trane Driver on the TC Modular Platform

GW1537R1

AND/OR

TC Modular TC Modular

RUN

RX1

RX2

RX3

FXX-485.3

485.3

RUN

RX1

RX2

RX3

FXX-485.3

485.3

Driver Installed in Driver Installed in

Automation

Level Network

Management

Level Network

(BACnet/IP)

(BACnet MS/TP)

TALON View

Workstation

RUN

RX1

RX2

RX3

FXX-485.3

485.3

TC Modular with

Firmware Revision 3.1

and Later

Equipment below this line typically

supplied and installed by others.

RS-485

RS-232

Trunk

Interface

BCUBCU

AHU

Controllers

PCM or UPCM

Controllers

TRANE Building

Control Unit

Other Equipment

Controllers

Maximum

BCU’s

Chiller Controller

(UCP1 or UCP2)

PCM or UPCM CONTROLLERS OTHER EQUIPMENT CONTROLLERS

TRANE

TRANETRANE

TRACER SUMMITTRACER SUMMIT

BACnet PTP

Figure 1. System Architecture.

Summary of content (2 pages)

PAGE 1
Technical Specification Sheet Document No. 127-0172T November 23, 2009 Trane Driver on the TC Modular Platform TALON View Workstation (BACnet/IP) 485.3 Management Level Network TC Modular with Firmware Revision 3.1 and Later RUN TX RX1 RX2 RX3 FXX-485.3 (BACnet MS/TP) TC Modular 485.3 Driver Installed in TC Modular 485.3 Automation Level Network Driver Installed in RUN TX RX1 RX2 RX3 FXX-485.3 RUN TX RX1 RX2 RX3 FXX-485.
PAGE 2
Notes on System Architecture Products Supported The Trane Driver provides communication between ® the TALON Automation System and the Trane system through Trane's BCU panels with an RS-232 connection. Trane models supported by the Trane Driver include: Since the connection to the Trane system is through their RS-232 port, Trane limits the number of points through the connection to 350.