Installation Instructions

Document No. 565-711
Installation Instructions
August 2, 2013
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as
design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.
© 2013 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
Tel. 1 + 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them
to [e-mail].
Document No. 565-711
Printed in the USA
Page 3 of 3
Connecting the BACnet Driver to
BACnet/IP Devices
Follow these steps to connect the BACnet Driver to
the BACnet/IP devices:
1. Make cables per the diagram in Figure 2.
2. Connect cables per the diagram in Figure 2.
NOTE:
For BACnet over Ethernet (BACnet/IP),
use IEEE 802.3 standard Ethernet
connections and cabling to complete
your network infrastructure.
Figure 2: Connecting the BACnet Driver to BACnet/IP Devices.