Manualshelf

Installation Instructions

ManualsBrandsSiemens Manuals3rd party integrationBACnet Driver for PXC Modular and PXC-36 Installaiton Instructions
123
Document No. 565-711
Installation Instructions
August 2, 2013
2
Siemens Industry, Inc.
Prerequisites
Driver hardware is installed according to its
respective installation instructions.
FLN Termination blocks are installed, if any.
Depending on the type of installation, other
prerequisites may have to be completed.
Connecting the BACnet Driver to
BACnet MS/TP Devices
Follow these steps to connect the BACnet Driver to
the BACnet devices:
1. Make cables per the diagram in Figure 1.
2. Connect cables per the diagram in Figure 1.
Figure 1: Connecting the BACnet Driver to BACnet MS/TP Devices.