Data Sheet for Product

Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as
design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.
© 2018 Siemens Industry, Inc. All presented offerings are subject to a cyber security disclaimer which is available at:
www.siemens.com/bt/cyber-security.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
Tel. 1 + 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them
to [e-mail].
Document No. 127-1648
Printed in the USA
Page 5 of 5
Error! No text of specified style in document.
Products Supported
Products Supported
For information on the BACnet device models supported by the BACnet Driver, contact
the Technical support.
Ordering Information
PXC Modular Series
PXC00-PE96.A PXC Modular, Ethernet or RS-485 ALN, 96 FLN nodes
PXC00-E96.A
PXC Modular, BACnet/IP or MS/TP ALN, 96 FLN nodes, TX-I/O
module support
PXC100-PE96.A
PXC Modular, Ethernet or RS-485 ALN, 96 FLN nodes, TX-I/O
module support
PXC100-E96.A
PXC Modular, BACnet/IP or MS/TP ALN, 96 FLN nodes, TX-I/O
module support
PXX-485.3 Expansion Module, three RS-485 FLN connections
PXC Compact Series
PXC36-PE.A PXC Compact, 36 point, Ethernet/IP or RS-485 ALN
PXC36-E.A PXC Compact, 36 point, BACnet/IP or MS/TP ALN
License
LSM-INT-BMSTP
License to enable the BACnet Driver on PXC Modular or PXC-36,
BACnet/IP PXC-24 or PXC-16 hardware.
LSM-FPWEBPLHST
Enables a PXC Series controller to host FIN Builder Graphics. On
PXC Modular or PXC-36 only.
LSM-FPWEBPL
Enables any PXC Series controller to supply the host controller with
data for FIN Builder Graphics.
LSM-ADAPT
License to use the Adaptive Control added in FW 3.5.1/2.8.18 and
later