Installation Instructions

Document No. 565-961
Installation Instructions
March 1, 2008
CAUTION:
Always wear an electro-static discharge
wrist strap and discharge accumulated
static before touching field panel
components.
Prerequisites
• Driver hardware is installed according to its
respective installation instruction s.
• FLN Termination blocks ins talled, if any.
Depending on the type of installation, other
prerequisites m ay have to be completed.
Connecting the Lumisys Driver to
the Lumisys System
Follow these steps to connect the Lumisys Driver to
the Lumisys system:
1. Make ca bles per diagram in Figure 1.
2. Connect cables per diagram in Figure 1.
Page 2 of 4 Siemens Building Technologies, Inc.