User Manual

&
1
t
1
0
1
0
Extensive automation
functions
The switching/dimming actuators offer extensive
control, override, and diagnostic functions that can
be activated in the ETS without additional modules
or controllers, i.e., in the same device.
Control functions:
For the control and switching of
lighting, both on/off switch
commands and time, scene, and
logic functions are available.
Lighting such as LED and fluores-
cent lamps can be switched and
dimmed via display and control
devices or through the evaluation
of sensor data.
Override functions: Lighting can
be overridden on a user-defined
basis, through evaluation of
sensor data, manually, or via
a centralized function.
All diagnostic functions can be
displayed via operating and
display devices.
Control valueDimming
Control value
Time
function
Manual
override
Logic
module
Lock
function
Day/night
Central
override
Status
1 2 3
Test Switch cycles Operating
hours
Display and
control
devices
Sensor data
Lighting
Configure
dimming
curves
Monitoring
Diagnostic functions:
The switching actuator diagnostic
and analysis functions are used to
test the device functions, device
installation, and switch cycles.
The minimum and maximum
dimming values and dimming
curves can also be configured.