User Manual

ManualsBrandsSiemens ManualsBC - Devices for Lighting ApplicationsKNX/DALI Gateways - pocket guide

Smart home

and building

solutions.

Global. Secure.

Connected.

Lighting control unit

with 1 to 10 volts

The new switching/dimming actuators

N 536D31 and N 536D51 are expand-

ing the DIN rail-mounted device family

to the application of lighting control

via a 1–10 V control interface. The DC

1...10-volt control outputs can be used

to control dimmable electronic ballasts

and LED drivers. The switch contacts

enable direct on/off switching of four

to eight light groups.

Optimal lighting control

With their extensive control functions,

the actuators enable the switching and

dimming of lighting as well as the setting

of brightness values using different

fade times. The configuration option

of predefined and user-defined

dimming curves enables optimal

dimming behavior. Individual thresh-

old values can be configured for the

dimming range. Switch-on/off delays

can be used to enable functions such

as stepless switching of the lighting.

Integrated scene control makes it

possible to call up customized lighting

moods. Seven override functions with

configurable priority levels are

available to override the lighting.

Intuitive front control field

Direct control on the front control field

makes it possible to test the installa-

tion using status LEDs and buttons.

The lighting can be switched and dimmed

individually for each channel with the

press of a button. The switching states

are signaled for each channel individually.

Diagnostic functions:

Switch cycle and operating hour

counting with threshold monitoring

supports optimal maintenance of the

lamps. Numerous status messages

provide reliable information about

the state of the lighting system.

Switching/dimming actuators

for lighting control

For switching and dimming of lighting groups with

electronic ballasts

siemens.com/gamma

Highlights

• High lighting quality through switching

and dimming of LEDs and fluorescent

lamps via 1- to 10-volt control outputs

• Optimal lighting for exceptional

convenience through configurable

dimming behavior

• Simple testing of the installation via

the front control field

• Maintenance-free terminals for the

reduction of the installation time

Summary of content (7 pages)

PAGE 1
Switching/dimming actuators for lighting control Smart home and building solutions. Global. Secure. Connected. Lighting control unit with 1 to 10 volts The new switching/dimming actuators N 536D31 and N 536D51 are expanding the DIN rail-mounted device family to the application of lighting control via a 1–10 V control interface. The DC 1...10-volt control outputs can be used to control dimmable electronic ballasts and LED drivers.
PAGE 2
Use of the new switching/ dimming actuators High convenience, productivity, and creativity in the workplace in offices and conference rooms requires optimal lighting! High lighting convenience with dimmable ECG Lighting types that cannot be dimmed directly are controlled by way of electronic ballasts (ECG). For example, fluorescent lamps are dimmed via ECG featuring a 1...10 V control input. The new switching/dimming actuators N 536D offer the corresponding control output.
PAGE 3
Extensive automation functions The switching/dimming actuators offer extensive control, override, and diagnostic functions that can be activated in the ETS without additional modules or controllers, i.e., in the same device. Lighting such as LED and fluorescent lamps can be switched and dimmed via display and control devices or through the evaluation of sensor data.
PAGE 4
Hardware characteristics Type N 536D31 N 536D51 Design N N DIN rail-mounted device for installation on rail TH35 DIN EN 60715   6 MW 8 MW On-site operation via membrane keypad   Switch position display via LEDs     Integrated bus coupler   Bus connection via bus terminal block   4 8 Enclosure data Dimensions Width (1MW = 18 mm) Display control elements Power supply Voltage supply of electronics via bus voltage Bus connection Outputs (load outputs) Potential-free rel
PAGE 5
Load specifications Type N 536D31 N 536D51 Service life Mechanical service life (operating cycles in millions) 1 Electrical service life (operating cycles in millions) 0.
PAGE 6
All important data at a glance Shared characteristics Functions per device Switching/dimming actuator N 536D Control functions Override functions • One relay contact per output as a switching element • Contact rated current voltage AC 230 V • Contact rated frequency 50 / 60 Hz • A control voltage output of DC...
PAGE 7
Smart Infrastructure intelligently connects energy systems, buildings and industries to adapt and evolve the way we live and work. We work together with customers and partners to create an ecosystem that intuitively responds to the needs of people and helps customers to better use resources. It helps our customers to thrive, communities to progress and supports sustainable development. Creating environments that care. siemens.