Installation Instructions
Document No. A6V10425806
Installation Instructions
September 10, 2014
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as
design improvements are introduced. APOGEE and Insight are registered trademarks of Siemens Industry, Inc. Other product or company
names mentioned herein may be the trademarks of their respective owners. © 2014 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
Tel. 1 + 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them
to SBT_technical.editor.us.sbt@siemens.com.
Document No. A6V10425806
Printed in the USA
Page 6 of 6
Figure 4: Enclosure Dimensions and Module Placement.
Figure 5: Using the Wire Barrier to Maintain Class 1 and Class 2 Wire Separation.