Owner manual

36
Intermittent ventilation starts automatically. The display
switches back to idle state after the set time has elapsed.
The saturation of the grease lters can be queried via the
Information button. To do this, the extractor hood must be
switched on.
Press thetbutton.
The saturation display of the grease lters can be reset even
before 100 % is reached.
1. Press the t button again. The settings area is lit.
2. Using the rotary selector, set the saturation display to 0 %.
If the t button is lit and a signal sounds when the extractor
hood has been switched o, the grease lters are 100%
saturated.
1. Clean the grease lters or replace the activated carbon
lter.
2. Set the indicator to “yes”.
3. Acknowledge the input by pressing the t button.
Saturation displays
Grease lters
NOTE
Operation
Grease filter saturtd:
60%
Carbon filter saturtd:
50%
Information
Fettfilter gereinigt?
nein
Grease filter cleaned?
yes
Carbon filter replacd?
no
Press the i button for more information
Grease filter saturtd:
60%
Information