Operating Instructions

Siemens Building Technologies,Inc. III
How To Use This Manual
This manual is written for the owner and user of the Siemens Building Technologies, Inc.
Fume Hood Controller. Direct communication with the Fume Hood Controller is accomplished
by using the portable operator's terminal and CIS. For more information about these
products, contact your local Siemens Building Technologies, Inc. representative.This section
covers manual organization, manual conventions and symbols used in the manual, how to
access help, related publications, and any other information that will help you use this
manual.
Manual Organzation
This manual contains the following chapters:
•
Chapter 1
-
Introduction
describes the basic functionality of the FHM.
•
Chapter 2 - External Hardware Components
describes the external components of
the FHM.
•
Chapter 3 - Internal Hardware Components
describes the internal components of
the FHM.
•
Chapter 4 - Application 651–Operating Mode
describes the control applications
available in the FHM.
•
Chapter 5 - Application 650–Slave Mode
describes the control applications available
in the FHM.
•
Chapter 6 - Point Database
defines the point database descriptors and includes
addresses and applications.
•
Chapter 7 - Hardware and Software Troubleshooting
describes corrective measures
you can take should you encounter a problem when using a FHM or the CIS. For
issues not covered in this section, contact your local Siemens Building Technologies,
Inc. representative.
• A
Glossary
describes the terms and acronyms used in this manual.
• An
Index
is provided to assist you in finding information.