Installation Instructions

Document No. 537-753
Installation Instructions
Rev. 3, February, 2000
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and
models as design improvements are introduced. © 2000 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
Landis & Staefa Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
Document No. 537-753
Printed in the U.S.A.
Page 2 of 2
Figure 2. Enclosure Wall Placement.
4. Align the top edge of the enclosure on the level
line made in Step 3. Mark the position of the two
mounting holes on the rear panel of the
enclosure. See Figure 1.
5. Drill the two mounting holes. Insert the wall
anchors.
6. Place the washers on the mounting bolts. Mount
the enclosure on the wall.
7. Replace the enclosure cover and tighten the
cover screws.
The installation is complete.