Installation Instructions

Installation Instruction
Document No. 546-00093
April, 27 2006
Lab AO-E Installation Instruction Addendum
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and
models as design improvements are introduced. Other product or company names mentioned herein may be the trademarks of their
respective owners. © 2006 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
Your feedback is important to us. If you
have comments about this document,
please send them to
[e-mail]
CAUTION:
The current/voltage switch on the Lab Actuator board (546-00450) has been temporarily
replaced by a six pin header. The header must be jumpered with P/N 527-614 as follows:
For 0-10V applications,
For 4 – 20 mA applications,
Document No.
546-00093
Country of Origin: US
Page 1 of 1