Installation Instructions

ManualsBrandsSiemens ManualsRoom controlsRoom Condition Monitor, RPM series

Building Technologies/Building Automation A6V10801244 2016-06-07 1 / 5

Sash Open Area Module

(SOAM)

DXA.S12C

Control Applications

Application 2951 through 2958

Application 2950 (slave mode) will not calculate sash area.

Accessories

50" Retracting Cable Sash Sensor

546-04000

80" Retracting Cable Sash Sensor

546-04001

30” Vertical UniTrak Sash Kit

546-00490

32” Vertical UniTrak Sash Kit

546-00489

35” Vertical UniTrak Sash Kit

546-00488

40” Vertical UniTrak Sash Kit

546-00487

44” Vertical UniTrak Sash Kit

546-00486

53” Vertical UniTrak Sash Kit

546-00485

71” Vertical UniTrak Sash Kit

546-00484

85” Vertical UniTrak Sash Kit

546-00443

34” Horizontal Sash Kit

546-00495

43” Horizontal Sash Kit

546-00493

52” Horizontal Sash Kit

546-00492

70” Horizontal Sash Kit

546-00491

84” Horizontal Sash Kit

546-00442

CAUTION

Retracting cable sash sensors must me installed properly. The string for the sash sensor must run

parrallel to the movement of the sash harware that the string is attached to.

Sash position and face area will not be presented accurately.

Dimension

A6V10801244

Summary of content (5 pages)

PAGE 1
A6V10801244 s Sash Open Area Module (SOAM) DXA.S12C Control Applications Application 2951 through 2958 Application 2950 (slave mode) will not calculate sash area.
PAGE 2
Wall-mounting 1A Panel-mounting 1B Wiring NOTE: All wiring must conform to national and local codes and regulations (NEC, CE, and so on.). 2 Face Area = Voltage output 'Y' is output signal, 'U' is input signal SCOM wiring 1.5 TSP Daisy chain: Connect the AO of the first to the AI of the second. 2/5 2016-06-07 A6V10801244 Siemens Industry, Inc.
PAGE 3
CAUTION The neutral that supplies the SOAM must be earth grounded at the source of the 24 Vac power. Possible erratic equipment operation or damage if neutral is not grounded. Unused sash wires terminate to a common terminal (┴) Pin Description 21...23 SCOM SCOM connection 11...
PAGE 4
Application 2951: 4 Independent Vertical Sashes, Bench Mounted Configuration. Application 2952: Floor Mounted Style – 2 Independent Sets of 2 Vertical Sashes. Application 2953: Dual – Floor Mounted Style – 4 Independent Sets of 2 Vertical Sashes. Application 2954: Bench Style – 2 to 10 Horizontal Sashes Configuration. Application 2955: 2 to 9 Combination Sash Bench Mounted Configuration. Application 2956: 2 Vertical sashes, with Top Sash having 2 to 8 Horizontal Sashes – Floor Mounted Configuration.
PAGE 5
Application 2957: Dual Bench style – Dual Combination with 2 to 4 Horizontal Sashes in the Vertical Carrier Configuration. Application 2958: 2 vertical sashes, with each Sash having 2 to 4 Horizontal Sashes – Floor Mounted Configuration. NOTE: For Application 2957 and 2958: In vertical sash 2, the first horizontal sash panel is always number 7. For example, if HZ PANEL CT = 4, then vertical sash 1 contains horizontal sashes 3 and 4 and vertical sash 2 contains horizontal sashes 7 and 8.