User`s manual

CHAPTER 2: PROGRAMMING
15
Display Screen
Parameter for:
32-Bit Unsigned Integer &
32-Bit BCD Data Description
Register Number The PLC data location operand and address.
Digits Right of Decimal The number of digits to be placed to the right of the
decimal.
Digits Left of Decimal The number of digits to be placed to the left of the decimal.
Show Leading Zeros (Y or N) Display any zeros to the left of the data.
Note : For the 32-Bit BCD selections, scaling of data is not supported. The
selected register number and the next higher sequential register number
identify the locations defining the 32 bit data value.
Display Screen
Parameter for:
16 -Bit HEX,
32-Bit HEX,
Timer &
Counter Data Description
Register Number The PLC data location operand and address.
Display Screen
Parameter for:
ASCII Data: Description
Register Number The PLC data location operand and address.
Character Count The number of characters (2 characters for each 16 bit
data location) to be displayed, up to a maximum of 20
characters. The initial byte of the location identified by the
register number is displayed first, then the second byte, the
first byte of the next higher sequential location, and so on.
To display 20 characters, a sequential block of ten 16 bit
locations is read by the SOI.