Installation manual

24
Ice and water dispenser
Malfunction
Possible cause Remedial action
The water filter symbol is
flashing.
The filter cartridge is worn out. Replace the filter cartridge.
Following the replacement of the filter
cartridge, the water filter symbol was not
reset.
Reset the water filter symbol.
The ice maker is not
producing enough ice
cubes or the ice cubes are
a strange shape.
The appliance or ice maker was only switched
on a short time ago.
It takes approx. 24 hours before ice
production begins.
A large amount of ice was removed. It takes approx. 24 hours, until the ice cube
container is again filled.
Water pressure too low. Check the water pressure.
The filter cartridge is blocked or worn out. Replace the filter cartridge.
The ice maker is not
producing enough ice
cubes or isn’t producing
any at all.
An ice cube has become stuck in the arm
used to measure the fill level of the ice cube
container.
Pull out the ice cube container and remove
the stuck ice using a blunt plastic implement.
Do not use pointed or sharp objects, as this
could damage the appliance.
When switching from ice cubes to crushed
ice, an ice cube might get stuck in the
dispenser opening. The ice cube drips into the
ice and water dispenser.
Remove the stuck ice from the dispenser
opening using a blunt plastic implement. Do
not use pointed or sharp objects, as this could
damage the appliance.
There is a layer of ice on the feed screw. Pull out the ice cube container and clean it.
The ice cube container
contains ice cubes but they
are not being dispensed.
The ice cubes have frozen together. Pull out the ice cube container and clean it.
The ice maker is not
producing ice cubes.
The ice maker is switched off. Switch the ice maker on.
The appliance is not being supplied with
water.
Have a skilled plumber check the water
connection line.
There are kinks in the water connection line. Turn off the water supply. Smooth out the
kinks. Have the damaged water connection
line replaced by an original spare part from the
manufacturer.
Water pressure too low. Check the water pressure.
The ice cube container is not inserted
properly.
Insert the ice cube container properly.
The water connection is improperly installed. An improper water connection can cause low
water pressure and damage to the appliance.
deen
Downloaded from Fridge-Manual.com Manuals