User`s manual

SH-300 User’s Manual Connection with PLC
Page 99 of 103
3. As B0012 is a function block of count type, is selected as the function object to read the
current value. It is shown as following graph:
a. Click to read current value of the function block B0012, and the address is BR12.0.
b. In program, the property pin is connected with DW0 , the value of DW0 can be read by SH-300
4．Modify parameter value of the function block B0012.
a. The value of the register DW12 is referenced as the count parameter for function block B0012
in APB program.
b. Click to set count parameter for the function block B0012, and the address is DW12.