User`s manual

SH-300 User’s Manual Connection with PLC
Page 97 of 103
2．Modify the parameter value of function block B0011.
a. In APB program, the value of the register DW10 is referenced as the off-delay time for the
function block B0011, and the value of the register DW11 is referenced as the hold-ON time.
The unit for the register value is millisecond.
b. Click to set off-delay time for the function block B0011, and the address is DW10. The
default unit for register value is Millisecond, which can be set as Second with 3 decimals.