User`s manual

SH-300 Text Panel

Page 68 of 103

4.8 ADC DL05 Series

SH-300 can communicate with ADC DL05 series PLC, the communication port is the

programming port of PLC., In order that the SH300 can communicate with ADC DL 05 series

communication Port2 normally, ADC PLC must be correspondingly configured. To do this, the

ADC Communication Protocol must be defined with the DirectSoft software, Select the “SETUP”

submenu under “PLC” option in the DirectSoft ,Set up Communication Ports according to the

picture indicated below.

SH-300 software configuration:

Item Content

SH-300 COM port 9 pin COM port

PLC COM port Programming port

Default parameter(port1)

Default parameter(port2)

9600bps(fixed)、8bits、1stop、0dd(fixed)

300-38400bps, 8bits、1stop、0dd(default)

Station No.(port1)

Station No.(port2)

1 (1 is fixed and can’t be changed)

1-99 ,1 is Windows default

Distance (Max.) 15m

Communication mode RS232

Cable type Special cable

Inner relay address M0-M777