User`s manual

SH-300 User’s Manual Connection with PLC
Page 65 of 103
4.5 Panasonic FP Series
SH-300 can communicate with Panasonic FP series PLC, the communication port is the
programming port of PLC or external communication port.
SH-300 software configuration:
Item Content
SH-300 COM port 9 pin COM port
PLC COM port Programming port
Default parameter
9600bps、8bits、1stop、0dd
Station No. 1-32 ,1 is Windows default
Distance (Max.) 15m
Communication mode RS232
Cable type Special cable
Inner relay address R0000-R875F
Register address DT0000-DT6134
Connection guidance of SH-CAB-FP0 :
2 RXD 2 TXD
SH-300 side 3 TXD 3 RXD PLC side
9 pin D shape 5 GND 7 GND 9 pin D shape
Female plug 4 Male plug
5
8
9
Connection guidance of SH-CAB-FP1 :
SH-300 side 2 RXD 2 TXD PLC side
9 pin D shape 3 TXD 3 RXD 5 pin D shape
Female plug 5 GND
１GND
Male plug
( when SH-300 communicates with Panasonic FP series PLC you are recommended to use the
the programming cable )
The picture for ５pin Round shape
Female plug