User`s manual

SH-300 User’s Manual Software Part
Page 53 of 103
Select “Register” under “Object” menu or click in the tool bar. Move the mouse to proper
place under “Current” and click the left key of the mouse to confirm. Then set the parameter
of the register, Address=D90, Digits=5, Decimal=1, Mode=Dec. Don’t select the “Set” check
box as shown in the following diagram:
6. Make Screen 5 “Alarm List”
Click in the tool bar. A prompting dialogue frame as the following will be show. Set the
initial coil type as M88 first. And the alarming information for M88 is “Be abnormal for unit1”;
the alarming information for M89 is “Be abnormal for unit 2”; the alarming information for M90
is “Be abnormal for unit 3”; as shown in the following diagram: