User`s manual

SH-300 Text Panel
Page 50 of 103
3. Make Screen 2 “Temperature Setting”
Click “New Screen” or icon, the following dialogue frame will be displayed:
Correctly select “2” as the screen number, input the screen description “Temperature
Setting”,select “1” as the up-jumping screen number and select “3” as the down-jumping
screen number as in the following diagram:
Press “OK” key to confirm and enter Screen 2. And place the text “Target”, “Current”, “Temp” in
proper place as the following diagram:
Select “Register” under “Object” menu or click in the tool bar. Move the mouse to proper
place under “Target” and click the left key of the mouse to confirm. Then set the parameter of
the register, Address=D0, Digits=4, Decimal=2, Mode=Dec. Select “Set” and “Limit” check box.
Then place the text “℃” on its right as shown in the following diagram: