User`s manual

SH-300 Text Panel
Page 18 of 103
2.4.1 File
This instruction is mainly used for project file management, including creating, opening, saving etc
Menu Name Function
New project Create a new project file
Open project Open an old project file
Save project Save the current project file
Save as Save the current file to a new path
Close project Close the current project file
Exit Exit SH300 software
2.4.2 Edit
This instruction is mainly used for tool management, including cut, copy, paste, delete, select all,
control, position and so on. The pulldown menu is shown as the following: