Specifications

4 Communication settings and guide of HMI connecting with controller
Note：M_special address: 8000 in the PLC corresponds to 0 in the HMI.
DW_special address: 8000 in the PLC corresponds to 0 in the HMI.
NB
Device Bit Address Word Address Format Notes
Data register
D 0~3F.F
------ HHH.H
Special relay
M_special 0~1FF
------ HHH
Counter contact
C 0~1F
------ HH
Timer contact
T 0~1F
------ HHH
Keep relay
L 0~1FF
------ HHH
Auxiliary relay
M 0~3FF
------ HHH
Output relay
Y 0~3F
------ HHH
Input relay
X 0~3F
------ HHH Read only
Timer contact
------
TW 0~1F
HHH
Counter contact
------
CW 0~1F
HH
Data register
------
DW 0~3F
HHH
Special register
------
DW_special 0~1FF
HHH
◎Cable Diagram
HMI terminal
9pin D-SUB female/male
Controller
Ethernet RS422 port (male)
1 RX-
4 TX-
6 RX+
4 TXD-
6 RXD-
3 TXD+
9 TX+
5 RXD+
com0/com1
4.23 GE Fanuc Automation Inc.
◎Serial Communication
Series
CPU
Link Module
Driver
GE Fanuc Series
90-30
IC693CPU311
IC693CPU313
IC693CPU321
IC693CPU323
IC693CPU331
IC693CPU340
IC693CPU341
IC693CPU350
Serial Connector on Power
Supply
GE Fanuc Series
SNP
- 93 -