Specifications

4 Communication settings and guide of HMI connecting with controller
NOTE
：When PLC is protected by password, protocol time out 2 is 65535, and the register is read only. If
you want to make the register writable, you must let the protocol time out 2 equal the PLC password.
Example: PLC password is 1234, and then you make the protocol time out 2 to be 1234.
PLC password is 0010, and then you make the protocol time out 2 to be 10.
◎Supported Device
SPB
Device Bit Address Word Address Format Notes
Data register
D 0~6FF.F
------ HHH.H
Special relay
M_special 0~1FF
------ HHH
Counter contact
C 0~FF
------ HH
Timer contact
T 0~1FF
------ HHH
Keep relay
L 0~FFF
------ HHH
Auxiliary relay
M 0~FFF
------ HHH
Output relay
Y 0~3FF
------ HHH
Input relay
X 0~3FF
------ HHH
Timer contact
------
TW 0~3FF
HHH
Counter contac
------
CW 0~FF
HH
Data register
------
DW 0~6FF
HHH
Special register
------
DW_special 0~1FF
HHH
Link register(0 slot)
------
W0 0~7FF
HH
Link register(1 slot)
------
W1 0~7FF
HHH
Link register(2 slot)
------
W2 0~7FF
HHH
Link register(3 slot)
------
W3 0~7FF
HHH
Link register(4 slot)
------
W4 0~7FF
HHH
Link register(5 slot)
------
W5 0~7FF
HHH
Link register(6 slot)
------
W6 0~7FF
HHH
Link register(7 slot)
------
W7 0~7FF
HHH
- 92 -