Specifications

4 Communication settings and guide of HMI connecting with controller
FBS-CB25-3 module communication
RS232 communication cable
Controller port1 terminal
9 pin D-SUB (male)
HMI terminal
9pin D-SUB female/male
2RXD
2TXD
3RXD
5SG
3TXD
5GND
7CTS
8RTS
7RTS
8CTS
com0/com1
RS485 communication cable
Controller port2
RS485 terminal
HMI terminal
9pin D-SUB female/male
D
-
D+
G
com0/com1
1 RX-
6 RX+
5 GND
Ethernet cable
Connecting PC and HMI use cross-ruling; communicating with hub or switch use cross-over cable or
cross-ruling.
Refer to
4.3 Download by Network Ethernet for method of making connection cable.
4.22 Fuji SPB
◎Serial Communication
Series CPU Link Module Driver
SPB NW0P20T-31 RS485 interface on the CPU
Fuji SPB
NB NB2U24R-11 RS485 interface on the CPU
◎System configuration
Series CPU Link Module Ethernet Type Parameter Cable
SPB
NW0P20T-31
RS485 interface on the CPU
RS485-4
Setting
Your owner cable
NB NB2U24R-11 RS485 interface on the CPU RS485-4
◎Communication Setting
- 91 -