Specifications

4 Communication settings and guide of HMI connecting with controller
3、 Click [ok] to save the settings.
◎Supported Device
Device Bit Address Word Address Format Notes
Input
X0-9999
------
DDDD
Output
Y0-9999
------
DDDD
Internal Relay
M0-9999
------
DDDD
Step Relay
S0-9999
------
DDDD
Timer Relay
T0-9999
------
DDDD
Counter Relay
C0-9999
------
DDDD
Data Register
------
R-L 0-3839
DDDD
Data Register
------
R-H 3840-9999
DDDD
Data Register
------
DR0-9999
DDDD
Timer
------
TMR0-9999
DDDD
Counter
------
CTR0-199
DDD
Double word Counter Register
------
DRC200-255
DDD
Note：R-L register corresponds to the “R” register of the PLC, the address range 0~3839;
R-H register corresponds to the “R” register of the PLC, the address range 3840~9999;
DR register corresponds to the “D” register of the PLC;
TMR register corresponds to the “T” register of the PLC;
CTR register corresponds to the “C” register of the PLC;
DRC register corresponds to the “C(32)” register of the PLC，e.g.：DRC200==C200
◎Cable Diagram
FB RS232 communication cable
Controller port0 terminal 4
pin Mini Din (male)
4 TXD
2 RXD
1 GND
com2
3 TX
2 RX
5 GND
8 TX
7 RX
5 GND
com0/com1
HMI terminal
9pin D-SUB female/male
Controller terminal
15 pin D-SUB (male)
2 TXD
1 RXD
6 GND
HMI terminal
9pin D-SUB female/male
com2
3 TX
2 RX
5 GND
8 TX
7 RX
5 GND
com0/com1
3 RTS
4 CTS
- 90 -