Specifications

4 Communication settings and guide of HMI connecting with controller
ETC RS485-2 on the CPU unit
EUC RS485-2 on the CPU unit
EPC RS485-2 on the CPU unit
EDP RS485-2 on the CPU unit
◎System configuration
Series CPU Link Module COMM Type Parameter Cable
ENDA
devices
ELC RS485-2 on the CPU unit RS485
Setting Your owner cable
ETC RS485-2 on the CPU unit RS485
EUC RS485-2 on the CPU unit RS485
EPC RS485-2 on the CPU unit RS485
EDP RS485-2 on the CPU unit RS485
◎Communication Setting
ENDA Devices:Default communication:9600, 8, 1, none; station：1
◎Supported Device
ENDA PLC Devices
Device Bit Address Word Address Format Notes
Output Relay
MB 0-65535
------
DDDDD
Input Relay (read only) IP 0-65535 ------ DDDDD
Output Register ------ MW 0-65535 DDDDD
Input Register (read only) ------ IR 0-65535 DDDDD
ENDA Controller Devices
Device Bit Address Word Address Format Notes
Coils Coils 0-65535 ------ DDDDD
Discrete input (read only)
DI 0-65535
------
DDDDD
Holding Registers
------
HR 0-65535
DDDDD
Input Register (read only) ------ IR 0-65535 DDDDD
- 79 -