Specifications

4 Communication settings and guide of HMI connecting with controller
※P L C A ttr ib u te (station disable)
※N etw ork con figu ration（Note: PLC port num. must be set 6042，HMI port num. is optional，default
is 6042. In addition, the screen and plc must be set in the same network segment, the gateway of the screen
is better to set with the actual use of the network gateway .
）
NOTE: To communicate with the touch screen, declare variable firstly in the Rexroth software.
PLC Setting
PLC connect with PC by crossover network cable，if using cross-connection network cable, you must
add a HUB (we usually use a cross-connection line to access the Internet)
1. After L40 equipped with software driver successfully, to set as follows:
- 49 -