Specifications

4 Communication settings and guide of HMI connecting with controller
8 OFF Always OFF
3. Station No. setting 1
4. Set the termination resistance switch of only the module which terminates the connection to 2- WIRE.
◎Network Communication Setting
HMI Setting
PLC setting
Use the swicthes on the right side of Ethernet module for setting the External Device.
1. Set all condition setup switch off.
2. Set IP Address: 192.168.100.230.
◎Supported Device
Device
Bit Address
Word Address
Format
Notes
Link Relay L 1~256 ------
DDD
Special Relay
M 1~256
------
DDD
Internal Relay
I 1~256
------
DDDD
Output Relay
Y (233~264)&(333~364）
------ DDD
Input Relay
X (201~232)&( 301~332
）
------
DDD
Read only
Special Register
------
Z_word 1~256
DDDD
Link Register
------
W_word 1~256
DDD
- 370 -