Specifications

4 Communication settings and guide of HMI connecting with controller
SGDV
Device
Bit Address
Word Address
Format
Function
Selection
------------
（Pn000~Pn002）&（Pn006~Pn009）
（
Pn00B~Pn00D
）
& Pn010 & Pn080
HHH
Gain ------------
（Pn100~Pn106）&（Pn109~Pn10F）& Pn11F
（Pn121~Pn125）&（Pn131~Pn132）& （Pn135~Pn136
）
（Pn139 & Pn13D）&（Pn140~Pn14B）
Pn14F &
（
Pn160~Pn165
）
&Pn170 & Pn190
HHH
Position ------------
Pn200 & Pn205 & Pn207 &Pn20A & Pn20E
Pn210 & Pn212 &
（
Pn216~Pn218
）
& Pn22A & Pn281
HHH
Speed
------------
（
Pn300~Pn307
）
&
（
Pn310~Pn312
）
& Pn324
HHH
Touque
------------
（Pn400~Pn410）& Pn412 & Pn415 &（Pn423~Pn425
）
Pn456 & Pn460 &（Pn481~Pn482）&（Pn486~Pn488）
Pn490 &
（
Pn493~Pn495
）
& Pn498
HHH
Sequential Control
------------
（Pn501~Pn503）&（Pn506~Pn509）& Pn51B
Pn51E & Pn520 & Pn522 & Pn524 & Pn526
（Pn528~Pn52C）&（Pn52F~Pn531）&（Pn533~Pn536
）
（
Pn550~Pn553
）
&
（
Pn560~Pn561
）
&
（
Pn600~Pn601）
HHH
Input/Output signal
------------
（
Pn50A~Pn513
）
&
（
Pn515~Pn517
）
HHH
UDP
Device Bit Address Word Address Format Notes
Input register node
IB0000.0-FFFF.F ------ HHHHH.H
Output register node OB0000.0-FFFF.F ------ HHHHH.H
holding register node MB00000.0-65534.F ------ DDDDD.H
Input register ------ IW0000-FFFF HHHH
Output register ------ OW0000-FFFF HHHH
Holding register ------ MW00000-65534 DDDDD
NOTE：In the HMIWare, bit address format is HHHH.H, but there is no point in the controller. E.g.: In the
EV5000 software, the bit address is MB65534.F, but there is no point in the controller, and it is MB65534F.
We set the I\O address as large as enough, and we found the big address can’t be written, but it is the same
effect with the monitoring.
◎Cable Diagram
V series inverter
RS485-2 communication cable
- 363 -