Specifications

4 Communication settings and guide of HMI connecting with controller
◎Supported Device
V inverter
Device
Bit Address
Word Address
Format
Notes
Internal/external output node 0X1-65535 ------ DDDDD
Internal/external input node
1X1-65535
------
DDDDD
Simulant input data register
------
3X1-65535
DDDDD
data register ------ 4X1-65535 DDDDD
NOTE:
1 this drive can not provide write batch of word part;
2 Address correspondence: MEMOBUS+1=4X
Eg: b1-01（requency instruction selection），MEMOBUS register address is 080 H;the corresponding
screen is 4X 385
MP2300
Device
Bit Address
Word Address
Format
Notes
Coil
MB0.0-4095.F
------
DDDD.H
Input Relay IB 0.0-FFF.F ------ HHHH.H
Hold Register ------ MW 0-65534 DDDDD
Input Register ------ IW 0-7FFF HHHH
NOTE：IB0.0-0.F are occupied by the system; IW0 is occupied by the system.
SGDM
Device
Bit Address
Word Address
Format
Notes
Function Selection Basic Switches ------
Pn000 ～ Pn003
HHH
Speed Loop Gain and so on ------
Pn100 ～ Pn118
HHH
Position Control Reference ------
Pn200 ～ Pn205
HHH
Speed Control Reference ------
Pn300 ～ Pn308
HHH
Torque Control Reference ------
Pn400 ～ Pn407
HHH
Sequence Reference ------
Pn500 ～ Pn510
HHH
Other ------
Pn600 ～ Pn601
HHH
Monitor mode ------
Un000 ～ Un00D
HHH
- 362 -