Specifications

4 Communication settings and guide of HMI connecting with controller
Sub addr DD correspond to temperature controller：
Sub Addr
Parameter
Sub Addr
Parameter
.0 SP .12 T2 2nd
.1
TM
.13
T3 1st
.2
None
（
Skip
）
.14
T3 2nd
.3 EV1 .15 T4 1st
.4 Blank .16 T4 2nd
.5 EV2 .17 T5 1st
.6 Blank .18 T5 2nd
.7 EV3 .19 PID
.8 Blank .20
None（Skip）
.9 T1 1st .21 9.5.
.10 T1 2nd .22 9.5.to
.11
T2 1st
SDC36
（Please refer to the manual of yamatake SDC36 for details）
Device
Bit Address
Word Address
Format
Notes
Data Register
————
4X 0-65535 DDDDD
DMC
（Please refer to the manual of DMC-SPL for details, in 10-8 communication parameters）
Device
Bit Address
Word Address
Format
Notes
Data Register ———— 4X 1002-65535 DDDDD
Address add 1 to the list of
communication parameters
Example: CH1 PV is according to 4X1005 in the HMIWare.
◎Cable Diagram
DCP 30 series
RS485 communication cable
com0/com1
HMI terminal
9pin D-SUB female/male
Controller
RS485 terminal
57
58
59
6 RX+
1 RX-
5 GND
60
61
RS232 communication cable
Need to use RS-232 to RS-422/485 converter
- 353 -